| |
The  range
of dry powder extinguishers have been manufactured under approved
ISO 9001 Quality System and are approved to Australian Standard
AS1841. The cylinders are deep drawn from cold rolled steel,
centre welded and pressure tested to twice the extinguisher
working pressure. The hot forged brass operating value is fitted
with a pressure indicator and incorporates facility to enable
'in service' testing as required by AS 1851.1. Coated with
epoxy powder, the cylinder offers corrosion resistance and
passes the 480 hours salt spray test. |
|
The range
of dry powder fire extinguisher are charged with specially
fluidised and silliconised mono ammonium phosphate powder which
offers resistance to compaction where the extinguisher is installed
in a location subjected to vibration and are safe and effective
for use on Class A and B fires. Being an electronically non
conductive extinguisher agent, dry
powder extinguishers are also safe for use on fires (Class E)
involving equipment carrying live electrical current.
Whether the area to be protected is a home,
car, caravan, boat, office or a major industrial or commercial
property, there is an extinguisher
available to suit the risk
|
|
